Veterinary Defibrillator Monitor (DM7000)

৳ 320,000

Veterinary Defibrillator Monitor DM7000

Product NameDefibrillator Monitor
Model NO.DM7000
ECG Monitoring3-Lead ECG Cable
Display:7″ TFT
Sweep Speed:25mm/Sec
Information:Information: Heart Rate, Lead/Pads, Alarm on/off.
Defibrillator Type:Manual, Synchronized, Asynchrony
Charge Time:Less Than 7 Seconds
Transport PackageCarton
SKU: HA - 1284 Category:


Veterinary Defibrillator Monitor DM7000

Product Description:

DM7000 is a defibrillation device, which can meet your clinical needs from Basic Life Support (BLS) to Advanced Cardiac Life Support (ACLS).

  • Display Type: High-resolution screen Screen Size: 7 inches (17.7 cm) diagonally Sweep Speed: 25mm / sec Information: Heart Rate, Lead / Pads, On / Off Alarm, SpO2, AED Functions and Prompts, Alarm Range and Limits, Delivered Power.
  • Charge Time: With a new fully charged battery for less than 7 seconds.
  • Energy screen: The display of the panel shows the energy selected and the energy supplied.
  • Prompt style charging: voice and visual prompts.
  • The scale of measurement of the electrode impedance: 0-250 ohms.
ECG Monitoring
  • Patient Connection: paddles with3-lead ECG or5-lead ECG cable.
  • Lead Selection: displayed on screen, paddles, I, II, III, AVR, AVL, AVF, V. ECG Size: 0.25, 0.5, 1, 1.5, 2, 4 cm / mV on screen.
  • Heart Rate: 20-300BPM. Heart Rate Alarm: On / Off displayed on monitor, user-selectable.
  • Smart Alarms: Beeper/voice prompts indicate a shockable rhythm.
  • Type: Ni-MH cell, rechargeable, 12V.
  • Running time: for a clean, fully charged battery: 60 defibrillator discharges at maximum power, or a total of 3 hours of continuous ECG monitoring. Additional parameters can result in different functions in running time.
SpO2 Module
  • Measurement range: 30~100 percent, ±2 percent ranging from 80 percent to 90 percent, other ±5 percent warning range: user-set high and low cap.
  • Warning accuracy: inside setting values of ±10 percent.
  • Precise alarm time: less than 12 seconds.
  • Paper: thermal 50 mm.
  • Speed: 12.5 mm per second, 25 mm per second, 50 mm per second. 6-second delay selectable for the consumer.
Printing method:
  • thermal print head with high resolution.
  • Modes for printing: manual and automatic, user-friendly.
    On/Off Control: Front panel and paddle.
    Automatic Function: 9-seconds recording initiated by alarm activation or defibrillator charge or defibrillator discharge.
AED Function:
  • Auto evaluate and load x3 with choice of programmable auto energy level, display prompts and voice prompts.
  • Shockable rhythms: Amplitude ventricular fibrillation >= 200uV, frequency ventricular tachycardia >= 140bpm, and complex wave length of QRS >= 140ms.
  • Control of the load: control of the front panel of the device, press the paddle key.
Manual Mode
  • Selection of energy: 2, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, 360 joules are selectable.
  • Synchronized mode: synchronizes the R-wave of the patient with the defibrillator pulse. Text “SYNC” shown on the screen.



There are no reviews yet.

Be the first to review “Veterinary Defibrillator Monitor (DM7000)”

Your email address will not be published. Required fields are marked *