Mindray SK-600I Infusion Pump

Mindray SK-600I Infusion Pump


Product NameInfusion Pump
Model SK-600I
MonitorTFT color 3.0 Inches
Infusion volumeAccumulation of 0,1 – 9999,9 ml
InformationFlow rate, prism volume, accumulated infusion volume, pressure, power indicator, battery capacity, battery charge indicator
Status indicatorStop, Run, Bolus, KVO
Alimentation100 – 240 VAC, 50/60 Hz
Temperature5 – 40° C for operation, -20 to 50 ° C for storage
Air pressure86 – 106 kPa for operation, from 50 to 106 kPa for storage
Humidity20% – 80%For operation, 10% – 95% for storage
BatteryLithium polymer capacity 25 ml / h up to 2 hours of continuous operation
SKU: HA - 1504 Category:


Mindray SK-600I Infusion Pump

Product Description

600I Mindray Infusion Pump is very easy to use, with an optional drip sensor and a fluid heater available. It provides a nice callback alarm in case you forget to start the operation. The Infusion Pump features are listed below.

  • Innovative, easy to operate, doorless design.
  • Middle Detection and Ultrasound Detectors for a double guarantee of accurate IV set loading Flow rate mode (SK-600I: 1-600 ml / h; SK-600IB: 1-2,000 ml / h)
  • Anti-bolus device to significantly reduce bolus after sudden occlusion.
  • Reminder alarm if the operation is not started.
  • Fluid heater and drip sensor optional.
  • Wireless data transfer with a system for infusion surveillance.



There are no reviews yet.

Be the first to review “Mindray SK-600I Infusion Pump”

Your email address will not be published. Required fields are marked *